Macro

Pushpin Modules : Logistics
Gear Step : Registration and Settings
Old Key Keywords: Driver login, Macro login, sending commands, trip link, odometer
To configure the behavior of specific macros, in the “CCO > Parameters” menu, click on the “Macro” option.

https://slite.com/api/files/-Ml9xJKX5smKAP/image.png?apiToken=eyJhbGciOiJIUzI1NiIsImtpZCI6IjIwMjMtMDUtMDQifQ.eyJzY29wZSI6Im5vdGUtZXhwb3J0IiwibmlkIjoiT3VPNzVQYUpPc29zREIiLCJpYXQiOjE3MzIwNjYyMDgsImlzcyI6Imh0dHBzOi8vc2xpdGUuY29tIiwianRpIjoiNW1Ea21PaUZNYnFtazAiLCJleHAiOjE3MzQ2NTgyMDh9.J66Ir6_bVsqhRqJAjthymvCoCUFsagL8yN4iNjkqU0k
When the “Macro” screen is loaded, the user must click on the “New” button on the right.

https://slite.com/api/files/9lPB_I8eHwjeBr/image.png?apiToken=eyJhbGciOiJIUzI1NiIsImtpZCI6IjIwMjMtMDUtMDQifQ.eyJzY29wZSI6Im5vdGUtZXhwb3J0IiwibmlkIjoiT3VPNzVQYUpPc29zREIiLCJpYXQiOjE3MzIwNjYyMDgsImlzcyI6Imh0dHBzOi8vc2xpdGUuY29tIiwianRpIjoiNW1Ea21PaUZNYnFtazAiLCJleHAiOjE3MzQ2NTgyMDh9.J66Ir6_bVsqhRqJAjthymvCoCUFsagL8yN4iNjkqU0k
When the Macro behavior parameterization screen opens, you must fill in the necessary information, with fields marked with * being mandatory.

https://slite.com/api/files/3wyWIa2i0rTNq8/image.png?apiToken=eyJhbGciOiJIUzI1NiIsImtpZCI6IjIwMjMtMDUtMDQifQ.eyJzY29wZSI6Im5vdGUtZXhwb3J0IiwibmlkIjoiT3VPNzVQYUpPc29zREIiLCJpYXQiOjE3MzIwNjYyMDgsImlzcyI6Imh0dHBzOi8vc2xpdGUuY29tIiwianRpIjoiNW1Ea21PaUZNYnFtazAiLCJleHAiOjE3MzQ2NTgyMDh9.J66Ir6_bVsqhRqJAjthymvCoCUFsagL8yN4iNjkqU0k
In the “Macro” field, the user must select which macro will be parameterized. After this selection, you must choose in “Options” which configuration will be made for this macro. All available options will be explained below according to the module to which they apply.

Journey Module:
  • Login: This option must be selected for the macro in which the driver enters his login and password, such as the Start of Journey macro. In the “Position” field, you must inform the position of the login field within the macro. In the field to the right of “Position”, you must always choose the “Login Tracker” option.
  • Logout: This option must be selected for the last macro that the driver sends on his journey, such as End of Journey macro.
Logistics Module:
  • Start Trip: select this option if you want to choose whether your trips will automatically start from a trip through the use of macros, in addition, there is also the option to capture the vehicle's odometer at the beginning and end of the trip.
  • End Trip: select this option if you want to choose whether your trips will automatically end a trip through the use of macros, in addition, there is also the option to capture the vehicle's odometer at the beginning and end of the trip.

In “commands” you can select which command will be triggered when a macro is selected by the driver, that is, when the driver sends the registered macro, which is associated with a specific command, this command will be triggered.

https://slite.com/api/files/CLgFRPgvh9Rqqx/image.png?apiToken=eyJhbGciOiJIUzI1NiIsImtpZCI6IjIwMjMtMDUtMDQifQ.eyJzY29wZSI6Im5vdGUtZXhwb3J0IiwibmlkIjoiT3VPNzVQYUpPc29zREIiLCJpYXQiOjE3MzIwNjYyMDgsImlzcyI6Imh0dHBzOi8vc2xpdGUuY29tIiwianRpIjoiNW1Ea21PaUZNYnFtazAiLCJleHAiOjE3MzQ2NTgyMDh9.J66Ir6_bVsqhRqJAjthymvCoCUFsagL8yN4iNjkqU0k
  • Request position: This option has the function of requesting the position of the vehicle.
  • Activate all Inputs: This option will enable the sensor, triggering input commands.
  • Disable all Inputs: This option will disable the sensor, meaning that input commands will not be triggered
  • Activate all Outputs: This option will enable the sensor, triggering the output commands.
  • Disable all Outputs: This option will disable the sensor, meaning that output commands will not be triggered
  • Change satellite analysis interval: It has the function of changing the analysis time for when entering satellite mode.
  • Change satellite transmission interval: It has the function of changing the equipment's transmission time when it is in satellite mode.
  • Send message: This option has the function of sending free text to the keyboard.
  • Lock: This option will trigger the lock command for the vehicle
  • Unlock: This option performs the opposite method of locking, that is, it will trigger the unlock command for the vehicle.
  • Activate Siren: The siren sensor will be enabled, so that the command can be triggered.
  • Disable the Siren: This option will disable the sensor, therefore, it will not trigger the siren command.
  • Activate disengagement: This option enables the disengagement sensor, so when the driver uses it, the command will be triggered.
  • Disable disengagement: The disengagement sensor will be disabled, therefore, the disengagement command will not be triggered.
  • Activate driver's door sensor: This option will enable the driver's door sensor, so that the command will be triggered when the door is open.
  • Disable driver door sensor: The sensor will be deactivated, therefore, the driver door sensor command will not be triggered.
  • Activate passenger door sensor: This option will enable the passenger door sensor, so that the command will be triggered when the door is open.
  • Disable passenger compartment sensor: The sensor will be deactivated, therefore, the passenger compartment sensor command will not be triggered
  • Activate panel violation: By activating this option, if the panel is violated, the command will automatically be triggered.
  • Disable panel violation: The sensor will be deactivated, therefore, the panel violation command will be triggered.

When finishing the settings, click the “Save” button.

https://slite.com/api/files/om0lqT03VkXdCY/image.png?apiToken=eyJhbGciOiJIUzI1NiIsImtpZCI6IjIwMjMtMDUtMDQifQ.eyJzY29wZSI6Im5vdGUtZXhwb3J0IiwibmlkIjoiT3VPNzVQYUpPc29zREIiLCJpYXQiOjE3MzIwNjYyMDgsImlzcyI6Imh0dHBzOi8vc2xpdGUuY29tIiwianRpIjoiNW1Ea21PaUZNYnFtazAiLCJleHAiOjE3MzQ2NTgyMDh9.J66Ir6_bVsqhRqJAjthymvCoCUFsagL8yN4iNjkqU0k
To edit a macro behavior, you must click on the corresponding macro to open its configuration screen.

https://slite.com/api/files/jeam7Kq-mrjnDx/image.png?apiToken=eyJhbGciOiJIUzI1NiIsImtpZCI6IjIwMjMtMDUtMDQifQ.eyJzY29wZSI6Im5vdGUtZXhwb3J0IiwibmlkIjoiT3VPNzVQYUpPc29zREIiLCJpYXQiOjE3MzIwNjYyMDgsImlzcyI6Imh0dHBzOi8vc2xpdGUuY29tIiwianRpIjoiNW1Ea21PaUZNYnFtazAiLCJleHAiOjE3MzQ2NTgyMDh9.J66Ir6_bVsqhRqJAjthymvCoCUFsagL8yN4iNjkqU0k
On the configuration screen for an already saved macro, it is possible to edit only the macro behavior configuration options. If the user wishes to change the “Technology”, “Layout” or “Macro” fields, it will be necessary to delete the configuration by clicking the “Delete” button and then create a new one.

https://slite.com/api/files/L-ASJxA_e-tqjj/image.png?apiToken=eyJhbGciOiJIUzI1NiIsImtpZCI6IjIwMjMtMDUtMDQifQ.eyJzY29wZSI6Im5vdGUtZXhwb3J0IiwibmlkIjoiT3VPNzVQYUpPc29zREIiLCJpYXQiOjE3MzIwNjYyMDgsImlzcyI6Imh0dHBzOi8vc2xpdGUuY29tIiwianRpIjoiNW1Ea21PaUZNYnFtazAiLCJleHAiOjE3MzQ2NTgyMDh9.J66Ir6_bVsqhRqJAjthymvCoCUFsagL8yN4iNjkqU0k
Note : If there is a change in the macro layout used, the parameterization must be redone based on the current layout.